3 uses for old Oil filter Grommets

Any Mods:Tricks:Customizations:tips.any jobs you have done where you have had to manufacturer your own solutions.Cheap parts to use etc
Forum rules
To use Search function add Asterisks around the words like *fork oil*

No Racism.Slanging Matches(unless witty and funny :)
No spamming.Anonymous posting disabled.

3 uses for old Oil filter Grommets

Postby Gman » Tue Apr 28, 2009 2:27 pm

1:Some years ago 'twas a Sunday.One of my side cans has lost it's grommets.I spotted an old oil filter and thought,Hmmmm.I bet I could use the rubber grommet out of the oil filter cut-down to make one for the Side cans.Cut to just under half and super-glued in it's still doing a good job over 4 years later :mrgreen:

Image

2:A small sliver of the oil filter Grommet sanded and stuck to the small part of the Throttle lever that actuates the the Front Brake light switch compensated for it being a bit slack and making the rear light flick on and off :mrgreen:


3:The Fuel Tank filler cap on the tank I used recently was vibrating a bit at certain revs even with it's spring loaded thing that holds the Cap up sooo......

Oil Filter Grommet to the rescue.

Image

:mrgreen: :mrgreen: :mrgreen:
User avatar
Gman
Site Admin
 
Posts: 1141
Joined: Thu Jul 24, 2008 8:11 pm
Location: Hull.Yorkshire.UK.2x1980 CX500ZABs:Citroen ZX TD(250,000 miles)

Re: 3 uses for old Oil filter Grommets

Postby Gman » Mon Jun 20, 2011 3:03 pm

Bumping
User avatar
Gman
Site Admin
 
Posts: 1141
Joined: Thu Jul 24, 2008 8:11 pm
Location: Hull.Yorkshire.UK.2x1980 CX500ZABs:Citroen ZX TD(250,000 miles)


Return to Tips And Tricks(Inc Cheaper substitutes)

Who is online

Users browsing this forum: No registered users and 1 guest

Help keep this forum ad-free - please Donate


This free, ad-free forum is hosted by ForumLaunch
cron